fprintf

echo

Last updated: Fri, 20 Nov 2009

explode

(PHP 4, PHP 5)

explode — Split a string by string

Description

array explode ( string $delimiter , string $string [, int $limit ] )

Returns an array of strings, each of which is a substring of string formed by splitting it on boundaries formed by the string delimiter .

Parameters

delimiter

The boundary string.

string

The input string.

limit

If limit is set and positive, the returned array will contain a maximum of limit elements with the last element containing the rest of string .

If the limit parameter is negative, all components except the last -limit are returned.

If the limit parameter is zero, then this is treated as 1.

Although implode() can, for historical reasons, accept its parameters in either order, explode() cannot. You must ensure that the delimiter argument comes before the string argument.

Return Values

If delimiter is an empty string (""), explode() will return FALSE. If delimiter contains a value that is not contained in string and a negative limit is used, then an empty array will be returned. For any other limit , an array containing string will be returned.

Changelog

Version	Description
5.1.0	Support for negative `limit` s was added
4.0.1	The `limit` parameter was added

Examples

Example #1 explode() examples


<?php
// Example 1
$pizza  = "piece1 piece2 piece3 piece4 piece5 piece6";
$pieces = explode(" ", $pizza);
echo $pieces[0]; // piece1
echo $pieces[1]; // piece2

// Example 2
$data = "foo:*:1023:1000::/home/foo:/bin/sh";
list($user, $pass, $uid, $gid, $gecos, $home, $shell) = explode(":", $data);
echo $user; // foo
echo $pass; // *

?>

Example #2 limit parameter examples


<?php
$str = 'one|two|three|four';

// positive limit
print_r(explode('|', $str, 2));

// negative limit (since PHP 5.1)
print_r(explode('|', $str, -1));
?>

The above example will output:

Array
(
    [0] => one
    [1] => two|three|four
)
Array
(
    [0] => one
    [1] => two
    [2] => three
)

Notes

Note: This function is binary-safe.


a simple function for explode to extract the image name from a url



I have included urldecode here but normally i use it before the function call as I'm usually doing something else with the url



function imageName($url){



    $url = urldecode($url);

    $imageName = explode("/",$url);

    $count = count($imageName);

    $count = $count - 1;

    

    return $imageName[$count];    



}

gxd305 at gmail dot com
17-Nov-2009 03:47


when the encoding of $string  is 'GBK' and $delimiter is '|' , the return value may be wrong. 


for example:





<?php


$result = explode("|", "滕华弢|海青");


var_dump($result);


?>





and the result will be:


array (


  0 => '滕华,


  1 => '',


  2 => '海青',


)





bcz "弢" 's GBK is '0x8f7c'. and "|" 's ASCII is '0x7c'.





So, all GBK-encoding characters include '7c' will lead to the error result.

nick dot brown at free dot fr
15-Oct-2009 01:47


My application was running out of memory (my hosting company limits PHP to 32MB).  I have a string containing between 100 and 20000 triplets, separated by a space, with each triplet consisting of three double-precision numbers, separated by commas.  Total size of the biggest string, with 20000 triplets, is about 1MB.



The application needs to split the string into triplets, then split the triplet into numbers.  In C, this would take up about 480K (20000 times 3 x 8 bytes) for the final array.  The intermediate array of strings shouldn't be much bigger than the long string itself (1MB).  And I expect some overhead from PHP, say 300% to allow for indexes etc.



Well, PHP5 manages to run out of memory *at the first stage* (exploding the string on the space character).  I'm expecting to get an array of 20000 strings, but it needs more than 32MB to store it.  Amazing.



The workaround was easy and had the bonus of producing faster code (I compared it on a 10000 triplet string).  Since in any case I had to split up the numeric triplets afterwards, I decided to use preg_match_all() on the original string.  Despite the fact that the resulting "matches" array contains more data per element than the result of explode() - because it stores the matched triplet, plus its component numbers - it takes up far less memory.



Moral: be careful when using explode() on big strings, as it can also explode your memory usage.

Jrg Wagner
13-Oct-2009 12:28


Here is a very concise example for a quote aware explode - substrings in quotes (or another definable enclosure char) are not exploded. 


An additional parameter allows to determine whether the enclosure chars should be preserved within the resulting array elements. Please note that as of PHP 5.3 the str_getcsv function offers a built-in way to do this!





<?php


function csv_explode($delim=',', $str, $enclose='"', $preserve=false){


  $resArr = array();


  $n = 0;


  $expEncArr = explode($enclose, $str);


  foreach($expEncArr as $EncItem){


    if($n++%2){


      array_push($resArr, array_pop($resArr) . ($preserve?$enclose:'') . $EncItem.($preserve?$enclose:''));


    }else{


      $expDelArr = explode($delim, $EncItem);


      array_push($resArr, array_pop($resArr) . array_shift($expDelArr));


      $resArr = array_merge($resArr, $expDelArr);


    }


  }


  return $resArr;


}


?>

Anonymous
29-Sep-2009 01:20


Note to the previous example: we can do the whole string->array conversion using explode() exclusively. 



<?php

    // converts pure string into a trimmed keyed array

    function string_2_array( $string, $delimiter = ',', $kv = '=>')

    {

        if ($element = explode( $delimiter, $string ))

        {

            // create parts

            foreach ( $element as $key_value )

            {

                // key -> value pair or single value

                $atom = explode( $kv, $key_value );



                if( trim($atom[1]) )

                {

                  $key_arr[trim($atom[0])] = trim($atom[1]);

                }

                else

                {

                    $key_arr[] = trim($atom[0]);

                }

            }

        }

        else

        {

            $key_arr = false;

        }



        return $key_arr;

    }

?>

Anonymous
03-Sep-2009 05:18


<?php

// converts pure string into a trimmed keyed array

function string2KeyedArray($string, $delimiter = ',', $kv = '=>') {

  if ($a = explode($delimiter, $string)) { // create parts

    foreach ($a as $s) { // each part

      if ($s) {

        if ($pos = strpos($s, $kv)) { // key/value delimiter

          $ka[trim(substr($s, 0, $pos))] = trim(substr($s, $pos + strlen($kv)));

        } else { // key delimiter not found

          $ka[] = trim($s);

        }

      }

    }

    return $ka;

  }

} // string2KeyedArray



$string = 'a=>1, b=>23   , $a, c=> 45% , true,d => ab c ';

print_r(string2KeyedArray($string));

?>



Array

(

  [a] => 1

  [b] => 23

  [0] => $a

  [c] => 45%

  [1] => true

  [d] => ab c

)

Anonymous
11-Aug-2009 08:55


If you are exploding string literals in your code that have a dollar sign ($) in it, be sure to use single-quotes instead of double-quotes, since php will not spare any chance to interpret the variable-friendly characters after the dollar signs as variables, leading to unintended consequences, the most typical being missing characters.



<?php

$doubleAr = explode(" ", "The $quick brown fox");

$singleAr = explode(" ", 'The $quick brown fox');

echo $doubleAr[1]; // prints "";

echo $singleAr[1]; // prints "$quick";

?>

vzverev at nm dot ru
24-Jul-2009 05:33


If you are going to use foreach after explode(), call reset() before foreach:


<?php


$arr = explode("\n", 'test \n test2 \n test3');


reset($arr);


foreach($arr as $line)


{ /* do something */ ; }


?>

marcus at synchromedia dot co dot uk
15-Jun-2009 04:50


Just in case the comment about empty strings is not clear:



<?php

$a = array();

var_dump($a);

$s = implode("\n", $a);

var_dump($s);

$b = explode("\n", $s);

var_dump($b);

$b = preg_split('/\n/', $s,-1,PREG_SPLIT_NO_EMPTY);

var_dump($b);

?>



Results in:



array(0) {

}

string(0) ""

array(1) {

  [0]=>

  string(0) ""

}

array(0) {

}



i.e. exploding an empty string results in an array with one element. You can use preg_split to skip the empty item, but that may not be quite what you need should your array have empty elements intentionally.

SR
21-Apr-2009 05:50


Keep in mind that explode() can return empty elements if the delimiter is immediately repeated twice (or more), as shown by the following example:



<?php

$foo = 'uno dos  tres'; // two spaces between "dos" and "tres"

print_r(explode(' ', $foo));

?>



Array

(

    [0] => uno

    [1] => dos

    [2] => 

    [3] => tres

)



Needless to say this is definitely not intuitive and must be handled carefully.

Michael
19-Apr-2009 12:29


Here's a simple script which uses explode() to check to see if an IP address is in an array (can be used as a ban-check, without needing to resort to database storage and queries).





<?php





 function denied($one) {





  $denied = array(





   0 => '^255.255.255.255',


   1 => '^255.250',


   2 => '^255.255.250'





  );





  for ($i = 0 ; $i < sizeof($denied) ; $i++) {





   if (sizeof(explode($denied[$i], '^' . $one . '$')) == 2) {


    return true;


   }





  }





  return false;





 }





 if (denied($_SERVER['REMOTE_ADDR'])) {


  header('Location: denied.php');


 }





?>

Navi
31-Mar-2009 03:03


<?php

function my_explode($delim, $str, $lim = 1)

{

    if ($lim > -2) return explode($delim, $str, abs($lim));



    $lim = -$lim;

    $out = explode($delim, $str);

    if ($lim >= count($out)) return $out;



    $out = array_chunk($out, count($out) - $lim + 1);



    return array_merge(array(implode($delim, $out[0])), $out[1]);

}

?>

This function can assume `limit' parameter less than 0, for example:

<?php

print_r(my_explode('.', 'file.some.ext.jpg', -2));

?>

prints

Array

(

    [0] => file.some.ext

    [1] => jpg

)

adrian at bilsoftware dot com
24-Feb-2009 12:40


<?php

function explode_escaped($delimiter, $string){

        $exploded = explode($delimiter, $string);

        $fixed = array();

        for($k = 0, $l = count($exploded); $k < $l; ++$k){

            if($exploded[$k][strlen($exploded[$k]) - 1] == '\\') {

                if($k + 1 >= $l) {

                    $fixed[] = trim($exploded[$k]);

                    break;

                }

                $exploded[$k][strlen($exploded[$k]) - 1] = $delimiter;

                $exploded[$k] .= $exploded[$k + 1];

                array_splice($exploded, $k + 1, 1);

                --$l; 

                --$k;

            } else $fixed[] = trim($exploded[$k]);

        }

        return $fixed;

    }

?>



Here's a function which explodes string with delimiter, but if delimiter is "escaped" by backslash, function won't split in that point. Example:



<?php



$result = explode_escaped(',', 'string, piece, group\, item\, item2, next\,asd');

print_r($result);

?>

Will give:

Array

(

    [0] => string

    [1] => piece

    [2] => group, item, item2

    [3] => next,asd

)

Elad Elrom
05-Dec-2008 07:02


<?php


// Remove words if more than max allowed character are insert or add a string in case less than min are displayed


// Example: LimitText("The red dog ran out of thefence",15,20,"<br>");





function LimitText($Text,$Min,$Max,$MinAddChar) {


   if (strlen($Text) < $Min) {


       $Limit = $Min-strlen($Text);


       $Text .= $MinAddChar;


   }


   elseif (strlen($Text) >= $Max) {


       $words = explode(" ", $Text);


       $check=1;


       while (strlen($Text) >= $Max) {


           $c=count($words)-$check;           


           $Text=substr($Text,0,(strlen($words[$c])+1)*(-1));


           $check++;


       }


   }


  


   return $Text;


}


?>

Nobody
17-Nov-2008 03:38


A really better and shorter way to get extension is via:





<?php $extension = end(explode('.', $filename)); ?>





this will print the last part after the last dot :)

shaun
29-Aug-2008 10:24


For anyone trying to get an array of key => value pairs from a query string, use parse_str.  (Better alternative than the explode_assoc function listed way down the page unless you need different separators.)

pinkgothic at gmail dot com
15-Oct-2007 12:26


coroa at cosmo-genics dot com mentioned using preg_split() instead of explode() when you have multiple delimiters in your text and don't want your result array cluttered with empty elements. While that certainly works, it means you need to know your way around regular expressions... and, as it turns out, it is slower than its alternative. Specifically, you can cut execution time roughly in half if you use array_filter(explode(...)) instead.



Benchmarks (using 'too many spaces'):

Looped 100000 times:

preg_split: 1.61789011955 seconds

filter-explode: 0.916578054428 seconds



Looped 10000 times:

preg_split: 0.162719011307 seconds

filter-explode: 0.0918920040131 seconds



(The relation is, evidently, pretty linear.)



Note: Adding array_values() to the filter-explode combination, to avoid having those oft-feared 'holes' in your array, doesn't remove the benefit, either. (For scale - the '9' becomes a '11' in the benchmarks above.)



Also note: I haven't tested anything other than the example with spaces - since djogo_curl at yahoo's note seems to imply that explode() might get slow with longer delimiters, I expect this would be the case here, too.



I hope this helps someone. :)

seventoes at gmail dot com
10-Dec-2006 05:49


Note that explode, split, and functions like it, can accept more than a single character for the delimiter.



<?php

$string = "Something--next--something else--next--one more";



print_r(explode('--next--',$string));

?>

djogo_curl at yahoo
01-Dec-2004 02:50


Being a beginner in php but not so in Perl, I was used to split() instead of explode(). But as split() works with regexps it turned out to be much slower than explode(), when working with single characters.

coroa at cosmo-genics dot com
16-Nov-2003 06:01


To split a string containing multiple seperators between elements rather use preg_split than explode:



preg_split ("/\s+/", "Here  are    to    many  spaces in   between");



which gives you

array ("Here", "are", "to", "many", "spaces", "in", "between");

add a note